FEEA SDK™ 2010 Features Comparison
|
 |
 |
 |
|
Cs Edition |
Fs Edition |
Ss Edition |
|
Std |
Pro |
Std |
Pro |
| Software Capabilities |
| Full 32/64-bit support |
|
|
|
|
|
| Visual Studio IDE support (Intellisense, debugging) |
|
|
|
|
|
| 100% “pure” managed .NET code |
|
|
|
|
|
| Support for versions 2.0 to 4.0 of .NET Framework |
|
|
|
|
|
| Support for C#, VB.NET, C++/CLI, Fortran, Delphi, etc. |
|
|
|
|
|
| Support for cross-language integration/inheritance |
|
|
|
|
|
| Optimized built-in exception handling mechanism |
|
|
|
|
|
| Optimized built-in event handling mechanism |
|
|
|
|
|
| Comprehensive documentation (html, pdf, chm) |
|
|
|
|
|
| Analysis Procedures |
| Static |
|
|
|
|
|
| Mode-Frequency (eigenvalue extraction) |
|
|
|
|
|
| Time history by mode superposition |
|
|
|
|
|
| Response spectrum |
|
|
|
|
|
| Transient implicit (Newmark, Wilson-θ Method) |
|
|
|
|
|
| Transient explicit (Central Difference Method) |
|
|
|
|
|
| Cross-section properties |
|
|
|
|
|
| Analysis Capabilities |
| Support for unlimited number of nodes and elements |
|
|
|
|
|
| Support for unlimited loading cases |
|
|
|
|
|
| Support for unlimited loading case combinations |
|
|
|
|
|
| Support for unlimited time-functions |
|
|
|
|
|
| Support for unlimited time history loading cases |
|
|
|
|
|
| Support for unlimited response spectra |
|
|
|
|
|
| Support for unlimited initial conditions |
|
|
|
|
|
| Multiple analysis procedures in a single computer run |
|
|
|
|
|
| Element Library – Formulations |
| Truss (2 nodes) |
|
|
|
|
|
| Beam (shearing deformations - 2 nodes) |
|
|
|
|
|
| 2-D solid triangular (variable 3- to 6-node) |
|
|
|
|
|
| 2-D triangular "torsion" (3- or 6-nodes) |
|
|
|
|
|
| 2-D solid quadrilateral (variable 4- to 9-node) |
|
|
|
|
|
| 2-D quadrilateral "torsion" (4- or 8 or 9-nodes) |
|
|
|
|
|
| 3-D hexahedral (variable 8- to 20- or 21- or 27-node) |
|
|
|
|
|
| 3-D tetrahedral (variable 4- to 10-node) |
|
|
|
|
|
| Spring (1-dof element) |
|
|
|
|
|
| Mass (1-dof element) |
|
|
|
|
|
| Damper (1-dof element) |
|
|
|
|
|
| Rigid link (2-node) |
|
|
|
|
|
| Rigid body (2-D/3-D variable node element) |
|
|
|
|
|
| Two-dimensional elements - Kinematic assumptions |
| Plane stress |
|
|
|
|
|
| Plane strain |
|
|
|
|
|
| Axisymmetric |
|
|
|
|
|
| Material Models |
| Elastic-isotropic |
|
|
|
|
|
| Elastic-orthotropic |
|
|
|
|
|
| Degrees of Freedom – Coordinate Systems |
| Master degree of freedom control |
|
|
|
|
|
| Variable 1 to 6 degrees of freedom per node |
|
|
|
|
|
| Support for unlimited number of coordinate systems |
|
|
|
|
|
| Node definition in system other than the global |
|
|
|
|
|
| Assign skew coordinate system to nodes |
|
|
|
|
|
| Boundary conditions |
| Fixity boundary conditions |
|
|
|
|
|
| Prescribed displacements |
|
|
|
|
|
| Initial conditions (displacements, velocities, etc.) |
|
|
|
|
|
| Single-point constraint equations |
|
|
|
|
|
| Multi-point constraint equations |
|
|
|
|
|
| Applied Loading |
| Force and moment load applied at node |
|
|
|
|
|
| Prescribed temperature load |
|
|
|
|
|
| Distributed load applied at truss/beam |
|
|
|
|
|
| Concentrated force/moment applied at truss/beam |
|
|
|
|
|
| Trapezoidal load applied partially at beam |
|
|
|
|
|
| Fixed-end forces to simulate arbitrary load at beam |
|
|
|
|
|
| Pressure load applied at 2-D solid element edges |
|
|
|
|
|
| Pressure load applied at 3-D solid element surfaces |
|
|
|
|
|
| Mass-proportional load to model gravity loading or ground acceleration |
|
|
|
|
|
| Damping |
| Modal damping |
|
|
|
|
|
| Reyleigh damping |
|
|
|
|
|
| Obtained Results |
| Cross-section properties |
|
|
|
|
|
| Nodal displacements, velocities and accelerations |
|
|
|
|
|
| Element internal forces and moments |
|
|
|
|
|
| Reactions forces and moments |
|
|
|
|
|
| Stresses at integration points in global system |
|
|
|
|
|
| Stresses at nodal points |
|
|
|
|
|
| Strains at integration points in global system |
|
|
|
|
|
| Strains at nodal points |
|
|
|
|
|
| Principal stresses at integration/nodal points |
|
|
|
|
|
| Effective stresses at integration/nodal points |
|
|
|
|
|
| Stresses at integration points in material system |
|
|
|
|
|
| Strains at integration points in material system |
|
|
|
|
|
| Selective output (at selected nodes/elements) |
|
|
|
|
|